TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 537 of 1364

2-57.

MAINTENANCE OF EXHAUST SYSTEM (ENGINE MODEL 7083-7398).

This task covers:

a.

Removal/Disassembly

c. Reassembly/lnstallation

b.

inspection/Repak

INITIAL SETUP

Tools and Special Tools

References

Plier wire twister (item 30, appx G)

TM 9-2350-238-24P-1

Materials/Parts

Equipment Conditions

Lockwasher (2)

2-935 Hull engine compartment deck

Lockwire (item 22, appx C)

assembly lid removed

Self-locking nut (4)

1

2

3

4

5

Remove Iockwire (1).

Remove four hexagon head capscrews (2)

and four flat washers (3).

Remove engine exhaust flange to tube

elbow (4).

Remove hexagon head capscrew (5) and

self-locking nut (6) from swing check valve

clamp (7). Remove engine exhaust

protective cap assembly (8) from engine

exhaust flange to tube elbow (4).

Remove hexagon head capscrew (9) and

self-locking nut (10) from swing check

valve disk (11). Remove swing check

valve disk from swing check valve clamp

(7) .

2-511