TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 533 of 1364

TM 9-2350-238-20-1

24

Install manual control engine shutdown Iever (66). Install hexagon head capscrew (67), new

Iockwasher (68), and hexagon plain nut (69).

25

Install rod end plain bearing (70). Install hexagon head capscrew (71), new Iockwasher (72),

and hexagon plain nut (73).

26

Install detent plate (74) and helical spring (75).

27

Install hexagon plain nut (76) on wire rope assembly (77). Install wire rope assembly on rod

end plain bearing (70) and tighten hexagon plain nut.

28

Install starting handle (78), cable end (79), and new spring pin (80).

29

Adjust rod end plain bearing (70) on wire rope assembly (77) until hole in rod end plain bearing

aligns with hole in engine shutdown manual control lever (66) when starting handle (78) is in

position against bulkhead.

2-507