TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 627 of 1364

TM 9-2350-236-20-1

2-80. MAINTENANCE OF HEADLIGHT ASSEMBLY.

This task covers:

a.

Disassembly

b.

Inspection/Repair

c. Reassembly

INITIAL SETUP

Tools and Special Tools

Automotive maintenance and repair shop

equipment: organizational maintenance,

common no. 1 (less power) (item 80,

appx B)

Soldering gun

Materials/Parts

Adhesive (item 4, appx C

Aircraft grease (item 19, appx C)

Antiseize compound (item 6, appx C)

Blackout marker inner nonmetallic seal

Blackout shield nonmetallic seal

Gasket

Gasket (2)

Headlamp cover nonmetallic seal

LockWasher (4)

LockWasher (2)

LockWasher (2)

LockWasher(15)

LockWasher(3)

Nonmetallic seal

Nonmetallic seal

Rubber headlight seal (2)

Sealant (item 36, appx C)

Sealing compound (item 37, appx C)

Sealing compound (item 38, appx C)

Shock cushion gasket (2)

Silicone compound (item 40, appx C)

Solder (item 43, appx C)

Solid rivet

Spring pin

Tubular rivet (2)

References

TB SIG-22

TM 9-2350-238-24P-1

Equipment Conditions

2-593 Headlight assembly removed

DISASSEMBLY

1

Remove four fillister head screws (1) and

four lockwashers (2) from headlamp cover

(3 )

.

2

Remove headlamp cover (3) from light

housing (4).

2-601