TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 618 of 1364

TM 9-2350-238-20-1

2-78. MAINTENANCE OF ELECTRICAL ACCESSORIES POWER BUS PANEL (CONT).

REASSEMBLY

1

2

3

4

5

6

Install three spring tension clips (1) and

three assembled washer screws (2) on

angle bracket (3).

Ensure circuit breaker is installed in

correct position.

Install four 15-amp circuit breakers (4),

20-amp circuit breaker (5), ten new

lockwashers (6), and ten machine screws

(7) to angle bracket (3).

Install two electrical shells (8), two bushing

insulators (9), and two terminal assemblies

(10) to two attached electrical cables (11).

Install electrical shell (12) and slotted

washer (13) to attached electrical cable

(14).

install rectifier and lead (15), two rectifier

mounting brackets (16), two flat washers

(17), and two machine screws (18) to

angle bracket (3).

Apply corrosion preventive sealant to

soldered terminals of rectifier. Fill recess

in top of rectifier with sealant, rounding off

surface so moisture cannot accumulate.

2-592