TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 617 of 1364

TM 9-2350-238-20-1

DISASSEMBLY

NOTE

Tag all electrical leads and cables

during disassembly to aid in

reassembly.

1

Remove two machine screws (1), two flat

washers (2), two rectifier mounting

brackets (3), and rectifier and lead (4)

from angle bracket (5).

2

Remove slotted washer (6) and electrical

shell (7) from attached electrical cable (8).

3

Remove two terminal assemblies (9), two

bushing insulators (10), and two electrical

shells (11) from two attached electrical

cables (12).

4

5

Remove ten machine screws (13), ten

Iockwashers (14), 20-amp circuit breaker

(15), and four 15-amp circuit breakers (16)

from angle bracket (5).

Remove three assembled washer screws

(17) and three spring tension clips (18)

from angle bracket (5).

INSPECTION/REPAIR

1

Inspect for broken, damaged, or missing parts.

2

Inspect rectifier for signs of overheating.

3

Inspect contact pin for corrosion.

4

Repair is by replacement of authorized parts (TM 9-2350-238-24P-1) which do not meet

inspection

criteria.

2-591