TM 9-2350-238-20-1
REMOVAL
Make sure MASTER switch is OFF before repairing electrical components. Failure to
observe this warning could result in injury to personnel.
Failure to remove or disconnect the batteries before removing or installing any
electrical wiring harness or lead may result in injury or damaged equipment.
1
Tag and disconnect all electrical leads from electrical accessories power bus panel (1).
2
Remove four assembled washer bolts (2) and
vehicle.
electrical accessories power bus panel (1) from
3
Tag and disconnect all electrical leads
from battery disconnect relay (3).
4
Remove two hexagon head capscrews (4),
two lockwashers (5), and battery
disconnect relay (3) from driver’s
compartment.
2-585