TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 639 of 1364

TM 9-2350-238-20-1

29

30

31

32

33

34

35

36

Bond new headlamp cover nonmetallic

seal (77) in groove of headlamp cover

(64), using adhesive.

Install new rubber headlight seal (78) on

clear light lens (79).

Apply antiseize compound to threads of

three machine screws (80). Install clear

light lens (79) with attached rubber

headlight seal, lens retainer (81), three

new lockwashers (82), and three machine

screws in headlamp cover (64).

Install new rubber headlight seal (83) on

infrared filter light lens (84).

Apply antiseize compound to threads of

three machine screws (85). Install infrared

filter light lens (84) with attached rubber

headlight seal, lens retainer (86), three

new lockwashers (87), and three machine

screws in headlamp cover (64).

Install new spring pin (88) in light housing

(7).

Apply a light coat of aircraft grease to

mounting surface of headlamp cover (64),

and install headlamp cover on light

housing (7), using spring pin (88) as a

guide.

Apply antiseize compound to threads of

four fillister head screws (89). Install four

new lockwashers (90) and four fillister

head screws.

2-613