TM 9-2350-236-20-1
3
Remove nonmetallic seal (8) from body
(4).
4
Remove two machine screws (9),
receptacle connector (10), preformed
packing (11), and electrical lead (7) from
body (4).
5
6
7
8
Loosen terminal screws R and W (12 and
13) and disconnect electrical leads (14
and 15). Do not remove terminal screws
R and W.
Remove two machine screws (16), two flat
washers (17), and lampholder (18).
Remove two machine screws (19), two
lockwashers (20), and lampholder (21).
Remove incandescent lamp (22), two
shoulder screws (23), lamp mounting plate
(24), and gasket (25) from lampholder
(18).
2-621