TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 660 of 1364

TM 9-2350-238-20-1

2-84. MAINTENANCE OF SENDING UNITS, WARNING SWITCHES, AND INDICATOR

LIGHTS (CONT).

1

2

3

4

5

6

7

Release parking brake.

Loosen nut (1).

Adjust nut (2) until roller (3) is fully de-

pressed.

Hold nut (2) from turning and tighten nut

(1).

Set MASTER switch ON.

Apply brakes. Stoplight will light.

Release brakes. Stoplight will go out.

2-85. MAINTENANCE OF LOW ENGINE COOLANT WARNING INDICATOR LIGHT.

This task covers:

a.

Disassembly

b.

Inspection/Repair

c. Reassembly

INITIAL SETUP

Tools and Special Tools

References

Automotive maintenance and repair shop

TB SIG-222

equipment: organizational maintenance,

TM 9-2350-238-24P-1

common no. 1 (less power) (item 80,

appx B)

Equipment Conditions

• Soldering gun

2-626 Low engine coolant warning

indicator light removed

Materials/Parts

Electrical wire (figure D-2, appx D)

Insulation sleeving (figure D-20, appx D)

Lockwasher (4)

Solder (item 43, appx C)

2-634