TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 884 of 1364

TM 9-2350-238-20-1

2-148. MAINTENANCE OF IDLER

ATTACHING PARTS, AND

WHEEL ARM AND HUB ASSEMBLY AND

IDLER WHEEL ARM AND HUB (CONT).

REMOVAL/DISASSEMBLY (CONT)

26

27

28

29

30

31

32

Using puller, remove roller bearing (11)

and plain encased seal (12) from hull.

Using puller, remove inner bearing ring

(13) and plain encased seal (14) from hull.

Remove retaining ring (15) from pivot arm

assembly (4).

Remove plain encased seal (16) from

pivot arm assembly (4).

Pry up cut lip of arm bearing seal idler

wheel sleeve (17) until clear of notch in

pivot arm assembly (4).

Using spanner wrench, remove arm

bearing seal idler wheel sleeve (17).

Using puller, remove arm to wheel support

roadwheel flange (18), roller bearing (19),

and inner bearing ring (20).

2-858