TM 9-2350-238-34-1
7
8
9
Using retaining ring pliers, remove retaining
ring (10) from input shaft mechanical
housing (3) .
Pry two plain encased seals (11) from input
shaft mechanical housing (3) .
Using bearing puller, remove annular bal l
bearing (12) from input shaft bearing housin g
(3).
INSPECTION/REPAI R
1
inspect for broken, damaged, or missing parts .
2
inspect annular ball bearing per TM 9-214 .
3
Repair is by replacement of authorized parts (TM 9-2350-238-24P-1) which do not meet inspectio n
criteria .
REASSEMBL Y
1
Lightly lubricate outer surface of annular ball
bearing (1) with lubricating oil. Using
bearing cup replacer (item 13, appx E),
install annular ball bearing into input shaft
mechanical housing (2) .
2-13 3