TM 9-2350-238-34- 1
7
8
9
1 0
Remove four screws (13), end plate (14),
and preformed packing (15) from block
(12) .
Push threaded end of controller shaft (7)
into block (12).
Remove spring (16), piston (17), an d
sleeve (18) from block (12).
Remove two preformed packings (19) fro m
sleeve (18) .
11
Remove controller shaft (7) and thrus t
bearing (20) from block (12).
12
Remove O-ring (21) from controller shaf t
(7) .
2-141