TM-9-2350-238-34-2

CRANE (CAB) COMPONENTS, RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

APRIL 1992

TM-9-2350-238-34-2 - Page 161 of 327

TM 9-2350-238-34-2

2-34. MAINTENANCE OF STAGE FOUR CARRIER ASSEMBLY (CONT).

INSPECTION/REPAIR

1 Inspect for broken, damaged, or missing parts.

2 If carrier is broken, damaged, or missing, repair is by replacement of next higher assembly.

3 If any kit component is damaged, replace entire winch stage four carrier parts kit.

4 Repair is by replacement of authorized parts (TM 9-2350-238-24P-2).

RESESSEMBLY

1 Install helical compression spring (1) and

winch spring stop (2) in rigid shaft coupl-

ing (3),

RETAINING

RING PLYIERS

ARBOR PRESS

2

3

Using arbor press, compress helical com-

pression spring (1) and winch spring stop

(2) inside rigid shaft coupling (3).

Using retaining ring pliers, install retaining

ring (4) in rigid shaft coupling (3). Slowly

release pressure and remove rigid shaft

coupling from arbor press.

2-148