TM-9-2350-238-34-2
CRANE (CAB) COMPONENTS, RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL
APRIL 1992
TM-9-2350-238-34-2 - Page 17 of 327
TM 9-2350-238-34-2
2-4. TROUBLESHOOTING INFORMATION (CONT).
Table 2-1. DIRECT SUPPORT TROUBLESHOOTING
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
CAB
1.
CAB DOES NOT TRAVERSE.
Step 1.
Step
2.
Check to make sure brake pressure selector knob is pushed in (normal
position) to allow system to operate.
Check for damaged traversing control linkage.
Replace or repair damaged traversing control linkage. Refer to
TM 9-2350-238-20-2.
Make sure hydraulic system is depressurized before per-
forming any hydraulic maintenance to prevent injury to
personnel.
Step
3. Check for leaking and damaged or clogged hydraulic lines.
Tighten all loose connections. Replace damaged hydraulic lines.
Refer to TM 9-2350-238-20-2.
Step
4.
Check for damaged hydraulic motor.
Replace or repair damaged hydraulic motor. Refer to page
2-247.
Step
5. Check for damaged traversing power unit.
Replace or repair damaged traversing power unit. Refer to page
2-222.
Step 6.
Check for damaged final drive assembly.
Replace or repair damaged final drive assembly. Refer to page
2-253.
2-4
Back to Top
