TM-9-2350-238-34-2
CRANE (CAB) COMPONENTS, RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL
APRIL 1992
TM-9-2350-238-34-2 - Page 18 of 327
TM 9-2350-238-34-2
Table 2-1. DIRECT SUPPORT TROUBLESHOOTING (CONT)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
2. CAB TRAVERSES SLUGGISHLY IN EITHER DIRECTION.
Make sure all personnel stand clear of boom and block
before traversing cab.
Step 1.
Check for leaking and damaged or clogged hydraulic lines.
Tighten all loose fittings. Replace damaged hydraulic lines. Refer
to TM 9-2350-238-20-2.
Step
2. Check turret traverse control directional linear valve for damage.
Replace or repair damaged turret traverse control directional
linear valve. Refer to page 2-217.
Step
3. Check for damaged mini check valve in hydraulic flow divider manifold.
Replace damaged mini check valve, Refer to page 2-192.
Step
4. Check for damaged traversing hydraulic motor.
Replace or repair damaged traversing hydraulic motor. Refer to
page 2-247.
TOW WINCH
3. TOW WINCH DOES NOT OPERATE.
Step 1.
Check for damaged winch control lever linkage.
Replace or repair damaged winch control lever linkage. Refer to
TM 9-2350-238-20-2.
Step
2. Check for damaged shift rod.
Replace or repair damaged shift rod. Refer to page 2-111.
Step
3. Check adjustment of winch control cylinder. Refer to page 2-111.
If cylinder cannot be adjusted, replace or repair winch control
cylinder. Refer to page 2-111.
2-5
Back to Top
