TM-9-2350-238-34-2

CRANE (CAB) COMPONENTS, RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

APRIL 1992

TM-9-2350-238-34-2 - Page 238 of 327

TM 9-2350-238-34-2

3

4

5

6

Adjust gear shaft thrust plug (5) until

seated, then back off three full turns.

From above cab deck, install two final

drive retainer plates (6) and six hexagon

capscrews (7). Torque six hexagon

capscrews to 135 to 150 ft-lb (183 to

203 N-m). Install new Iockwire (8) to

secure six hexagon capscrews (7).

Rig hoist and sling through rigger’s

cupola opening. Attach sling to hydraulic

drain tee (9) and traverse brake control

shuttle valve (10) of cab traversing unit

(11).

Lift cab traversing unit (11) through rig-

gers cupola opening and install in cab.

2-225