TM-9-2350-238-34-2

CRANE (CAB) COMPONENTS, RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

APRIL 1992

TM-9-2350-238-34-2 - Page 237 of 327

TM 9-2350-238-34-2

2-46. MAINTENANCE OF TRAVERSING SYSTEM INSTALLATION (CONT).

REMOVAL (CONT)

9

10

From above cab deck, remove Iockwire

(20), six hexagon capscrews (21), and

two final drive retainer plates (22).

With one man inside

traversing final drive

locking nut (24)

agon capscrew

drive.

flat

26),

INSPECTION/REPAIR

cab well supporting

(23), remove self-

washer (25), hex-

and traversing final

1 Inspect for broken,

2 Cab traversing unit

damaged, or missing parts.

is a repairable assembly. Refer to page 2-227.

3 Traversing final drive is a repairable assembly. Refer to page 2-253.

4 Repair by replacement of authorized parts (TM 9-2350-238-24P-2).

INSTALLATIO N

1 With one man inside cab well to help

support traversing final drive (1), install

traversing final drive in cab.

2 Secure traversing final drive (1) with

hexagon capscrew (2), flat washer (3),

and new self-locking nut (4). Torque hex-

agon capscrew to 200 to 220 ft-lb (271

to 298 N-m).

2-224