TM-9-2350-238-34-2

CRANE (CAB) COMPONENTS, RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

APRIL 1992

TM-9-2350-238-34-2 - Page 227 of 327

TM 9-2350-238-34-2

2-44. MAINTENANCE OF SOLENOID VALVE (CONT).

HIGH-PRESSURE

SETTING ADJUSTMENT (CONT)

12

13

14

15

16

17

18

Do not allow pressure to go over

1850 psi {12,756 kPa). Failure to

follow instructions may result in

damage to equipment.

Adjust pressure for solenoid valve (3) to

between 1650 and 1850 psi (11,377

and 12,756 kPa) by turning screw (9)

counterclockwise to decrease pressure or

clockwise to increase pressure.

When correct pressure adjustment is ob-

tained, tighten nut (8).

If correct pressure adjustment cannot be

obtained, replace solenoid valve (3).

Refer to page 2-192.

Turn off hydraulic system. Refer to TM

9-2350-238-10.

Set LEVEL WIND switch (6) to OFF.

Release level wind assembly. Refer to

TM 9-2350-238-10.

OI L

PRESSURE

TESTER

Push in TRAVERSING BRAKE PRESSURE

SELECTOR knob (5).

2-214