TM-9-2350-238-34-2
CRANE (CAB) COMPONENTS, RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL
APRIL 1992
TM-9-2350-238-34-2 - Page 232 of 327
TM 9-2350 -238-34-2
8
9
10
11
12
13
Remove port fitting (17) from body (2).
Remove preformed packing (1 8), packing
retainer (1 9), and preformed packing (20)
from port fitting (1 7).
Remove two assembled washer screws
(21), spool seal retainer (22), wiper ring
(23), seal wiper (24), and preformed
packing (25) from body (2).
If damaged, remove two drive screws
(26) and turret traverse control valve
body nameplate (27) from body (2).
Remove assembly plug (28) from body
(2).
Remove backup ring (29), preformed
packing (30), preformed packing (31 ),
backup ring (32), and preformed packing
(33) from assembly plug (28).
INSPECTION/REPAIR
-—
1
2
3
4
5
6
Check for broken, damaged, or missing
parts.
If assembly plug is broken, damaged, or
missing, repair is by replacement of next
higher assembly.
If body is broken, damaged, or missing,
repair is by replacement of next higher
assembly.
If plug valve is broken, damaged, or
missing, repair is by replacement of next
higher assembly.
If check valve is broken, damaged, or
missing, repair is by replacement of next
higher assembly.
If spool cap is broken, damaged, or miss-
ing, repair is by replacement of next
higher assembly.
7
8
9
10
11
If port fitting is broken, damaged, or
missing, repair is by replacement of next
higher assembly.
If turret traverse control valve body
nameplate is broken, damaged, or miss-
ing, repair is by replacement of next
higher assembly.
If drive screws are broken, damaged, or
missing, repair is by replacement of next
higher assembly.
If spool seal retainer is broken, damaged,
or missing, repair is by replacement of
next higher assembly.
If spacers are broken, damaged, or miss-
ing, repair is by replacement of next
higher assembly.
2-219
Back to Top
