TM-9-2350-238-34-2

CRANE (CAB) COMPONENTS, RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

APRIL 1992

TM-9-2350-238-34-2 - Page 224 of 327

TM 9-2350-238-34-2

HIGH-PRESSURE SETTING ADJUSTMENT

●

Make sure all personnel stand clear when operating boom to avoid injury to

personnel.

●

When testing hydraulic system, be sure boom is in stowed position as failure of

system may result in injury to personnel.

1 Perform adjustment of check valve pro-

cedure. Refer to page 2-179.

2 Turn off hydraulic system. Refer to TM

9-2350-238-10.

3 Set SUSP VALVE lever (1) to LOCKED.

4 Remove pilot cap (2) from solenoid valve

(3).

2-211