TM-9-2350-238-34-2

CRANE (CAB) COMPONENTS, RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

APRIL 1992

TM-9-2350-238-34-2 - Page 252 of 327

TM 9-2350-238-34-2

5 Install six washer bearings (9) and using

retaining ring pliers, instaIl six new re-

taining rings (10) to primary planetary

speed gear assembly (7).

6 Using bearing and clutch remover and

replacer, install two internal gear ball

bearings (11) in bearing carrier (12).

7 Apply engine oil (item 15, appx B) to all

gear teeth.

8 Install bearing carrier (12) in internal gear

(13).

9 Using spanner wrench, install new key

washer (14) and plain nut (15). Tighten

until bearing carrier (12) is seated, Bend

up tangs of key washer (14).

2-239