TM-9-2350-238-34-2

CRANE (CAB) COMPONENTS, RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

APRIL 1992

TM-9-2350-238-34-2 - Page 258 of 327

30

31

32

33

3 4

Aline scribe mark on internal gear

with scribe mark on mechanical gear

housing. Remove alinement rods.

Install new ring gear gasket (49) and in-

ternal gear (50) in mechanical gear hous-

ing (46). Aline mounting holes in gasket,

gear, and housing.

Using oil seal replacer and remover and

replacer handle, install new plain encased

seal (51) in oil seal retainer (52).

Install new ring gear gasket (53) and oil

seal retainer (52). Aline scribe line on oil

seal retainer and mechanical gear hous-

ing (46).

Apply sealing compound (item 20, appx

B) to twelve socket head capscrews

(54).

Install twelve socket head capscrews

(54) to secure oil seal retainer (52) to

mechanical gear housing (46). Torque

screws to 23 to 25 ft-lb (31 to 34 N-m).

TM 9-2350-238-34-2

2-245