TM-9-2350-238-34-2

CRANE (CAB) COMPONENTS, RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

APRIL 1992

TM-9-2350-238-34-2 - Page 263 of 327

TM 9-2350-238-34-2

2-48. MAINTENANCE OF TRAVERSING HYDRAULIC MOTOR (CONT).

DISASSEMBLY(CONT)

11 Using hammer and drift, remove bushing

(19) from backside of front housing (8).

12 Remove preformed packing (20) from

bushing (19).

13 Only if damaged, remove ball (21) from

underside of front housing (8).

INSPECTION/REPAIR

1 Inspect for broken, damaged, or missing parts.

2 If front housing is broken, damaged, or missing, repair is by replacement of next higher

assembly.

3 If shaft is broken, damaged, or missing, repair is by replacement of next higher assembly,

4 Repair by replacement of authorized parts (TM 9-2350-238-24P-2).

1 If removed, install ball (1) in underside of

front housing (2).

2 Apply engine oil (item 15, appx B) on

new preformed packing (3).

3 Install new preformed packing (3) in

groove of new bushing (4).

4 Using hammer and drift, install new

bushing (4) into backside of front hous-

ing (2).

2-250