TM-9-2350-238-34-2

CRANE (CAB) COMPONENTS, RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

APRIL 1992

TM-9-2350-238-34-2 - Page 272 of 327

TM 9-2350-238-34-2

8 Using replacer, install two new plain en-

cased seals (8) in idler spur gear (1).

9 Install two idler spur gears (1) in me-

chanical housing (9). Retainer and roller

bearings (5) must face lower side of

mechanical housing (9).

10 Using wood block and hammer, install

two idler gear shouldered shafts (10) in

mechanical housing (9) with shouldered

end up.

NOTE

If key washer is damaged, new key

washer must be installed.

11 Using spanner wrench, install new key

washer (11) and plain round nut (12) on

each of two idler gear shouldered shafts

(10). Tighten plain round nut (12).

2-259