TM-9-2350-238-34-2

CRANE (CAB) COMPONENTS, RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

APRIL 1992

TM-9-2350-238-34-2 - Page 288 of 327

TM 9-2350-238-34-2

INSPECTION/REPAIR

1 Inspect for broken, damaged, or missing parts.

Dry cleaning solvent (SD2) is toxic and flammable. Wear protective goggles and

gloves and use only in well-ventilated area.

2 Remove adhesive from upper and lower surfaces of outer race (1) with wire brush and dry

cleaning solvent (item 5, appx B).

3 Remove sealing compound from seal retaining plates (2) and hexagon head capscrews (3)

with wire brush and dry cleaning solvent (item 5, appx B).

4 Clean retainers (4) with soft brush and mild soap solution.

5 If turret filler plug is broken, damaged, or missing, repair is by replacement of next higher

assembly.

6 Outer race is unserviceable if there are five or more pits within a 12.00 in. (30.48 cm)

distance, or any pit is more than 1.00 in. (2.54 cm) long, 0.06 in. (0.16 cm) wide, or 0.03

in. (0.08 cm) deep.

7 If inner race is broken, damaged, or missing, repair is by replacement of next higher assembly.

8 If outer race is broken, damaged, or missing, repair is by replacement of next higher

assembly.

9 Repair is by replacement of authorized parts (TM 9-2350-238-24P-2) which do not meet in-

spection criteria.

2-275