TM-9-2350-256-10

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

OPERATOR'S MANUAL

OCTOBER 2014

  TM-9-2350-256-10 - Page 179 of 796

HOIST WINCH CABLE ACCESS DOOR OPERATION
INITIAL SETUP:
Tools and Special Tools
General mechanic's tool kit
(WP 0135, Table 1, Item 2)
OPEN HOIST WINCH CABLE ACCESS DOOR
1.
Remove padlock if present.
2.
Loosen nuts on two latch assemblies (Figure 1, Item 2) and remove latch assemblies from door slots.
3.
Open access door (Figure 1, Item 1).
END OF TASK
CLOSE HOIST WINCH CABLE ACCESS DOOR
1.
Position hoist winch cable in cable slot (Figure 1, Item 3).
2.
Close access door (Figure 1, Item 1).
3.
Hook two latch assemblies (Figure 1, Item 2) into door slots and secure nuts.
Figure 1.
Operate Hoist Winch Cable Access Door.
END OF TASK
END OF WORK PACKAGE
TM 9-2350-256-10
0034
0034-1/blank


Back to Top