ADJUSTING COMMANDER'S SEAT - Continued
WARNING
Apply weight to seat while adjusting. If weight is not applied, spring tension of seat may
cause personnel injury.
NOTE
Apply weight to seat when performing the following steps.
4.
Tilt adjustment — Pull handle (Figure 2, Item 2) outward and hold, tilt seat to desired position,
release handle.
5.
Height adjustment — Pull lever (Figure 2, Item 1) upward and hold, adjust seat height to desired position,
then release lever.
Figure 2.
Seat Tilt and Height Adjustment.
END OF TASK
END OF WORK PACKAGE
TM 9-2350-256-10
0036
0036-2