TM-9-2350-256-10
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
OPERATOR'S MANUAL
OCTOBER 2014
TM-9-2350-256-10 - Page 196 of 796
PREPARE AN/VVS-2(V)1A PERISCOPE FOR OPERATION - Continued
2.
Remove lens cover (Figure 1, Item 1) and stow in periscope stowage box.
CAUTION
Stow AN/VVS-2(V)1A periscope battery at all times in the periscope stowage
compartment. Battery may leak and damage periscope. The periscope battery is used
when vehicle is not running and periscope is needed. Failure to comply may result in
damage to equipment.
3.
Remove battery cap (Figure 1, Item 2) and ensure battery has been removed. Reinstall battery cap.
Figure 1.
Lens Cover and Battery Cap.
4.
Turn MASTER switch (WP 0004) to OFF position.
5.
Ensure OFF-BRIGHT knob (Figure 2, Item 4) is set to OFF position.
6.
Turn mount (Figure 2, Item 1) to position detent and align sides of mount with sides of periscope
(Figure 2, Item 3).
7.
Press and hold lever (Figure 2, Item 2) and raise periscope through hatch. Lock periscope into place by
releasing lever.
TM 9-2350-256-10
0039
0039-2
Back to Top
