TM-9-2350-256-10
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
OPERATOR'S MANUAL
OCTOBER 2014
TM-9-2350-256-10 - Page 225 of 796
STARTING APU - Continued
CAUTION
•
Do not run APU for longer than 1 hour with generator or hydraulics engaged in a
heavy load condition. After 1 hour, turn off auxiliary generator or hydraulic system.
Run engine to allow it to cool before engaging hydraulics or generator again.
Failure to comply may result in damage to equipment.
•
If HIGH AIR TEMP light comes on during operation, turn off APU and let it cool. If
light comes on often, troubleshoot (WP 0081). Failure to comply may result in
damage to equipment.
6.
Check gauge and indicators on the APU CONTROL BOX while APU is operating.
END OF TASK
SHUT DOWN APU
1.
Turn APU GEN switch (Figure 4, Item 3), FUEL SHUTOFF switch (Figure 4, Item 1), and MASTER switch
(Figure 4, Item 2) to OFF position. If APU continues to run, perform Step 2.
Figure 4.
APU Controls and Accessories Panel.
TM 9-2350-256-10
0042
0042-5
Back to Top
