TM-9-2350-256-10
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
OPERATOR'S MANUAL
OCTOBER 2014
TM-9-2350-256-10 - Page 389 of 796
PAYOUT MAIN WINCH CABLE FOR SINGLE LINE RECOVERY USING THE HOIST WINCH (LEAD METHOD)
- Continued
17.
Attach main winch cable to tow cable sling legs using two shackles on the tow cables and one shackle to
the main winch.
18.
Move HOIST WINCH operating lever (Figure 2, Item 1) to RAISE and retrieve HOIST winch cable, keeping
tension on cable.
19.
Move MAIN WINCH operating lever (Figure 2, Item 2) to INHAUL to recover disabled vehicle. Keep MAIN
WINCH operating lever in INHAUL position until disabled vehicle is as close as possible to main winch. This
will keep tension on main winch cable during inhaul.
20.
Release MAIN WINCH operating lever (Figure 2, Item 2).
21.
Chock disabled vehicle and move the MAIN WINCH lever to PAYOUT position to release tension on the
main winch cable.
22.
Disconnect cables and stow equipment.
23.
Rig the 25-ton snatch block on the boom or stow the 25-ton snatch block.
Figure 2.
Single Line Recovery Main Winch and Hoist Winch Levers.
END OF TASK
TM 9-2350-256-10
0072
0072-5
Back to Top
