TM-9-2350-256-10

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

OPERATOR'S MANUAL

OCTOBER 2014

TM-9-2350-256-10 - Page 392 of 796

PAYOUT MAIN CABLE FOR DOUBLE LINE RECOVERY USING HOIST WINCH (LEAD METHOD) -

Continued

WARNING

Do not move both the HOIST WINCH and MAIN WINCH operating levers to INHAUL

position at the same time. This may result in the hoist winch cable snapping. Failure to

comply may result in personnel death or injury.

12.

Attach hoist winch cable to 90-ton snatch block using correct size shackles.

13.

Slowly move HOIST WINCH operating lever (Figure 4, Item 1) to RAISE position to take slack out of cable.

CAUTION

Start payout of main winch cable slowly. Fast payout can cause the cable to unspool.

Failure to comply may result in damage to equipment.

14.

Move MAIN WINCH operating lever (Figure 4, Item 2) to PAYOUT position.

Figure 4.

Double Line Recovery MAIN WINCH and HOIST WINCH Operating Levers.

TM 9-2350-256-10

0072

0072-8