PERSONNEL HEATER TROUBLESHOOTING
INITIAL SETUP:
Tools and Special Tools
General mechanic's tool kit
(WP 0135, Table 1, Item 2)
Personnel Required
Crewman (3)
References
Charging vehicle batteries with Auxiliary Power
Unit (APU) (WP 0043)
References (cont.)
Description and use of operator’s controls and
indicators (WP 0004)
Fueling (WP 0117)
Personnel heater operation (WP 0037)
WARNING
•
Throughout troubleshooting of the electrical system or electrical components, be
certain vehicle MASTER switch (WP 0004) is off between every step unless
otherwise directed. Failure to comply may result in personnel death or injury.
•
Remove any rings, bracelets, wristwatches, and neck chains before working on
any vehicle. Jewelry can catch on equipment and cause injury, or may short
across electrical circuit and cause severe burns or electrical shock. Failure to
comply may result in personnel death or injury.
•
Fuel is very flammable and can explode easily.
When working with fuel, post signs that read: "NO SMOKING WITHIN
50 FEET OF VEHICLE."
Keep fuel away from open flame or extreme heat.
Always keep fire extinguisher within easy reach when working with fuel.
Failure to comply may result in personnel death or injury.
•
Fuel is slippery and may cause falls. Wipe up spillage immediately with rags.
Dispose of materials in accordance with local hazardous waste disposal
procedures. Failure to comply may result in personnel death, injury, and/or
damage to equipment.
WARNING FAULTS
During operation, if an abnormal condition occurs, indicator lamp on heater control box will begin flashing and a
code (07 or 14) will be displayed on the diagnostic display. The heater will try to correct the fault. If fault cannot be
TM 9-2350-256-10
0089
0089-1