TM-9-2350-256-20-1

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 1 OF 2

NOVEMBER 2005

TM-9-2350-256-20-1 - Page 893 of 948

TM 9-2350-256-20-1

0143 00

UNIT MAINTENANCE

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

NSN 2350-00-122-6826, EIC AQA

ENGINE COOLING FAN SHROUD SEALS REPLACEMENT

REMOVAL, INSTALLATION

INITIAL SETUP:

Tools and Special Tools

Tool kit, general mechanic’s (item 59, WP 0490 00)

Materials/Parts

Lockwashers (27) (item 640, WP 0491 00)

Screws (27) (item 721, WP 0491 00)

Washers, flat (27) (item 537, WP 0491 00)

Equipment Condition

Engine deck removed (see WP 0336 00)

Removal

1.

Remove four corner seals (1) by removing four screws (2), four lockwashers (3), and four flat washers (4).

2.

Remove two end seals (5) by removing seven screws (6), seven lockwashers (7), and seven flat washers (8).

3.

Remove 2 side seals (9) by removing 16 screws (10), 16 lockwashers (11), and 16 flat washers (12).

Installation

1.

Install 2 side seals (9) by installing 16 flat washers (12), 16 lockwashers (11), and 16 screws (10).

2.

Install two end seals (5) by installing seven flat washers (8), seven lockwashers (7), and seven screws (6).

3.

Install four corner seals (1) by installing four flat washers (4), four lockwashers (3), and four screws (2).

NOTE

Follow-on maintenance: Install engine deck (see WP 0336 00).

END OF WORK PACKAGE

0143 00-1/2 blank