TM-9-2350-256-20-1
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 1 OF 2
NOVEMBER 2005
TM-9-2350-256-20-1 - Page 895 of 948
TM 9-2350-256-20-1
0144 00
UNIT MAINTENANCE
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
NSN 2350-00-122-6826, EIC AQA
ENGINE
COOLING
FANS
REPLACEMENT
REMOVAL, INSTALLATION
INITIAL SETUP:
Tools and Special Tools
Tool kit, general mechanic’s (item 59, WP 0490 00)
Wrench, torque, 0–175 lb-ft (0–237 N•m) (item 67, WP
0490 00)
Materials/Parts
Lockwashers (8) (item 135, WP 0491 00)
Nuts (2) (item 275, WP 0491 00)
Pins, cotter (2) (item 527, WP 0491 00)
Materials/Parts (cont.)
Screws (4) (item 354, WP 0491 00)
Screws (2) (item 403, WP 0491 00)
Screws (2) (item 407, WP 0491 00)
Washers, flat (2) (item 330, WP 0491 00)
Equipment Condition
Shroud seals removed (see WP 0143 00)
NOTE
Removal and installation procedures are the same for both the forward and rear cooling fans.
Removal
1.
Remove housing (1) by removing four screws (2) and four lockwashers (3).
0144 00-1
Back to Top
