TM-9-2350-256-20-1

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 1 OF 2

NOVEMBER 2005

TM-9-2350-256-20-1 - Page 896 of 948

TM 9-2350-256-20-1

0144 00

2.

Remove cotter pin (4), nut (5), and flat washer (6).

NOTE

Do not separate hub and fan, as this will affect the balance of the assembly.

NOTE

Both forward and rear hub and fan assemblies are interchangeable.

3.

Remove assembled fan (7) and hub (8).

Installation

1.

Install assembled fan (7) and hub (8) on splined vehicle shaft.

2.

Install flat washer (6) and nut (5). Torque nut to 50 pound-feet (lb-ft) (68 newton-meters [N•m] ).

3.

Align slot with hole in shaft and install cotter pin (4).

0144 00-2