TM-9-2350-256-20-2

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 2 OF 2

JUNE 2005

TM-9-2350-256-20-2 - Page 634 of 1440

TM 9-2350-256-20-2

0312 00

NOTE

Remove pins (18 and 19) only if replacement is necessary.

4.

Remove from gun support pintle (15), setscrews (20 and 21), nut (22), block (23), adapter (24), screw (25), two buttons

(26), and pin (18). File or grind off beveled ends of pin to remove.

5.

Remove seal (27). Clean all dirt and adhesive from gun ring assembly (28).

6.

Remove lock ring shoe (29) by removing bolt (30), pin (19), and two buttons (31). File or grind off beveled ends of pin to

remove.

7.

Remove eight screws (32) and eight lockwashers (33). Lift out padding assembly (34).

0312 00-4