TM-9-2350-256-20-2

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 2 OF 2

JUNE 2005

TM-9-2350-256-20-2 - Page 636 of 1440

TM 9-2350-256-20-2

0312 00

NOTE

Early design models also use jacking screw (42).

11.

Remove six direct vision blocks (43) by cutting lockwire (44) and removing two screws (45) on each prism lock wedge (46).

12.

Remove six prism lock wedges (46).

13.

Remove inside latch (47) from cupola door (4) by removing spring pin (48).

14.

Remove plug (49) and latch spring (50) by removing two screws (51).

15.

Loosen jamnut (52) and remove rod end connector (53).

16.

Remove jamnut (52).

17.

Drive out pin (54). Separate trigger rod (55) from latch (56) and remove trigger rod, washer (57), and spring (58).

0312 00-6