TM-9-2350-256-20-2

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 2 OF 2

JUNE 2005
TM-9-2350-256-20-2

  TM-9-2350-256-20-2 - Page 644 of 1440

TM 9-2350-256-20-2
0313 00
Removal
1.
Raise driver’s cab-top door (1) about 2 inches (in.) (51 millimeters [mm] ) to align self-locking nuts (2 and 3) on arm control
pin (4) with opening in shaft housing (5).
2.
Remove control arm (6) by removing self-locking nut (2), arm control pin (4), washer (7), and self-locking nut (3).
3.
Remove driver’s cab-top door (1) by pulling up through shaft housing (5).
4.
Remove rubber strip (8) from driver’s cab-top door (1).
5.
Remove shaft housing (5) by removing five screws (9) and five lockwashers (10).
0313 00-2


Back to Top