TM-9-2350-256-20-2

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 2 OF 2

JUNE 2005

TM-9-2350-256-20-2 - Page 660 of 1440

TM 9-2350-256-20-2

0317 00

Removal

1.

Remove handle (1) by removing cotter pin (2), nut (3), washer (4), and latch (5).

2.

Remove rubber strip (6). Clean all dirt and adhesive from stowage compartment door (7).

3.

Remove stowage compartment door (7) by removing two cotter pins (8), two washers (9), and two straight pins (10).

NOTE

Step 4 applies only to right stowage compartment door.

NOTE

Remove flow regulator setting instruction plate (11) from right stowage compartment door only if

illegible.

4.

Remove flow regulator setting instruction plate (11) by removing four drivescrews (12).

Installation

1.

If removed, install flow regulator setting instruction plate (11) with four drivescrews (12).

2.

Install stowage compartment door (7) with two straight pins (10), two washers (9), and two cotter pins (8).

3.

Install rubber strip (6) by applying adhesive and pressing strip in place. Allow adhesive to dry before closing stowage

compartment door (7).

4.

Install handle (1) with latch (5), washer (4), nut (3), and cotter pin (2).

0317 00-2