TM-9-2350-256-20-2

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 2 OF 2

JUNE 2005

TM-9-2350-256-20-2 - Page 664 of 1440

TM 9-2350-256-20-2

0318 00

5.

Remove rubber strip (12) from personnel door (11). Clean all dirt and adhesive from opening.

NOTE

Open door halfway and secure to relieve stress on torsion bar prior to removing retainer.

6.

Remove torsion bar retainer (13) by removing four screws (14), four lockwashers (15), and lubrication fitting (16).

WARNING

Ensure door is properly supported before removing door assembly (17) to prevent personal injury or

equipment damage.

7.

Remove door assembly (17) and two shims (18) by removing eight screws (19) and eight lockwashers (20).

8.

Remove control cam (21), torsion bar (22), tube (23), expansion plug (24), and two hinge leafs (25).

0318 00-2