TM-9-2350-256-34

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

JULY 2005
TM-9-2350-256-34

  TM-9-2350-256-34 - Page 143 of 584

TM 9-2350-256-34
0026 00
INTERMEDIATE MAINTENANCE
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
NSN 2350-00-122-6826, EIC AQA
ELECTRIC
FUEL
PUMP
MAINTENANCE
DESCRIPTION, REMOVAL, DISASSEMBLY, CLEANING, INSPECTION,
REPAIR, ASSEMBLY, TEST, INSTALLATION
INITIAL SETUP:
Test Equipment
Multimeter (item 23, WP 0086 00)
Tools and Special Tools
Tool kit, general mechanic’s (item 34, WP 0086 00)
Materials/Parts
Cleaning compound (item 5, WP 0085 00)
Detergent (item 6, WP 0085 00)
Fuel (item 7, WP 0085 00)
Clamp, hose (item 180, WP 0087 00)
Lockwashers (4) (item 153, WP 0087 00)
Materials/Parts (cont.)
Lockwashers (3) (item 159, WP 0087 00)
Lockwasher (item 232, WP 0087 00)
Nuts (2) (item 170, WP 0087 00)
Nuts (3) (item 200, WP 0087 00)
Nut, hexagon (item 10, WP 0087 00)
Packing (item 17, WP 0087 00)
Screws (2) (item 140, WP 0087 00)
Screws (3) (item 145, WP 0087 00)
References
TM 9-2350-256-20
DESCRIPTION
The fuel pump is located in the forward fuel tank sump cavity and is a centrifugal pusher-type pump designed for submerged
operation. It operates by power from a 24 V dc motor contained in the pump assembly.
Removal
WARNING
Do not smoke or use open flame when working on fuel system. Explosion may occur, causing severe
injury or death.
1.
Remove fuel pump in accordance with TM 9-2350-256-20.
Disassembly
NOTE
Refer to TM 9-2350-256-20 for disassembly instructions for the terminal assembly.
0026 00-1


Back to Top