TM-9-2350-256-34

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

JULY 2005

TM-9-2350-256-34 - Page 285 of 584

TM 9-2350-256-34

0053 00

Installation

1.

Install two lifting eyes to hoist winch assembly (38) and attach sling to lifting eyes.

NOTE

There are two methods of moving and securing the hoist winch assembly (38) into position: steps 2 thru

7 or steps 8 thru 10 (depending on how removed).

2.

Using sling, lower hoist winch assembly (38) straight down thru cupola plate opening into position. Continue to support

weight of hoist winch assembly with sling.

3.

Move cross support beam (46) into position.

NOTE

Ensure marks made on shims (47) and cross support beam (46) match to ensure alignment of winch and

mechanical transmission mounting holes.

4.

Install shims (47), eight lockwashers (49), and screws (48).

0053 00-9