TM-9-2350-256-34

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

JULY 2005

TM-9-2350-256-34 - Page 290 of 584

TM 9-2350-256-34

0053 00

2.

Place load on winch. Use calibrated weights or load cell if available. Load cell must be anchored.

If a load cell or weights are unavailable, attach cable to an anchor or adjust winch brake full tight. Refer to WP

0058 00 for brake adjustment procedure.

3.

If using anchor or winch brake, use adjusting screw (54) on hoist winch combination control valve (25) to reduce pressure

as far as possible. Turning in counterclockwise direction will decrease pressure.