TM-9-2350-256-34
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL
JULY 2005
TM-9-2350-256-34 - Page 299 of 584
TM 9-2350-256-34
0056 00
INTERMEDIATE MAINTENANCE
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
NSN 2350-00-122-6826, EIC AQA
MAIN
WINCH BRAKE CYLINDER MAINTENANCE
REMOVAL, TESTING, INSTALLATION, ADJUSTMENT
INITIAL SETUP:
Test Equipment
Gage (item 9, WP 0086 00)
Tools and Special Tools
Tool kit, general mechanic’s (item 34, WP 0086 00)
Materials/Parts
Screws (4) (item 101, WP 0087 00)
Equipment Condition
Subfloor plates 1 and 2 removed (TM 9-2350-256-20)
WARNING
Brake adjusting screw (2) must be loosened prior to removal of brake cylinder (5). Use care in removing
brake cylinder.
Removal
1.
Loosen locknut (1) and adjusting screw (2).
2.
Disconnect hose (3).
WARNING
Back off screws (4) evenly to prevent heavy spring pressure inside from “popping” cylinder.
3.
Remove four screws (4) and brake cylinder (5).
0056 00-1
Back to Top
