TM-9-2350-256-34

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

JULY 2005

TM-9-2350-256-34 - Page 415 of 584

TM 9-2350-256-34

0073 00

INTERMEDIATE MAINTENANCE

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

NSN 2350-00-122-6826, EIC AQA

HYDRAULIC OIL TANK TOP COVER ASSEMBLIES REPLACEMENT

REMOVAL, INSTALLATION

INITIAL SETUP:

Tools and Special Tools

Tool kit, general mechanic’s (item 34, WP 0086 00)

Materials/Parts

Gaskets (2) (item 42, WP 0087 00)

Lockwashers (26) (item 161, WP 0087 00)

Screws (24) (item 56, WP 0087 00)

Materials/Parts (cont.)

Screws (4) (item 112 WP 0087 00)

Screws (2) (item 214, WP 0087 00)

Equipment Condition

Subfloor plates 8, 10, and 11 removed (TM 9-2350-

256-20)

Removal

1.

Disconnect five drain lines (1) and stow out of way.

NOTE

Perform steps 2 thru 4 to remove rear top cover (4).

2.

Remove four screws (2) and identification plate (3) from rear top cover (4).

3.

Remove two adapter unions (5) and nuts (6) from rear top cover (4).

4.

Remove 12 screws (7), lockwashers (8), rear top cover (4), and gasket (9) from hydraulic oil tank (10). Discard lockwashers

and gasket.