TM-9-2350-256-34

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

JULY 2005

TM-9-2350-256-34 - Page 419 of 584

TM 9-2350-256-34

0074 00

INTERMEDIATE MAINTENANCE

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

NSN 2350-00-122-6826, EIC AQA

HYDRAULIC OIL TANK FRONT COVER ASSEMBLY REPLACEMENT

REMOVAL, INSTALLATION

INITIAL SETUP:

Tools and Special Tools

Tool kit, general mechanic’s (item 34, WP 0086 00)

Materials/Parts

Gasket (item 42, WP 0087 00)

Lockwashers (12) (item 161, WP 0087 00)

Lockwashers (12) (item 162, WP 0087 00)

Lockwashers (12) (item 163, WP 0087 00)

Lockwashers (4) (item 185, WP 0087 00)

Packings (3) (item 132, WP 0087 00)

Screws (12) (item 56, WP 0087 00)

Screws (4) (item 62, WP 0087 00)

Materials/Parts (cont.)

Screws (8) (item 66, WP 0087 00)

Screws (4) (item 72, WP 0087 00)

Screws (4) (item 99, WP 0087 00)

Screws (4) (item 217, WP 0087 00)

Screws (4) (item 226, WP 0087 00)

Equipment Condition

Subfloor plate 11 removed (TM 9-2350-256-20)

Tank drained below level of front cover (TM 9-2350-

256-20)

Removal

1.

Remove four screws (1), lockwashers (2), two flanges (3), and disconnect hydraulic hose (4) from fittings (5). Discard

lockwashers.

2.

Remove four screws (6), lockwashers (7), two flanges (8), and fittings (5). Discard lockwashers.

3.

Remove and discard packing (hidden) (9).

4.

Remove eight screws (10), lockwashers (11), four flanges (12), and disconnect two hydraulic hoses (13). Discard lock-

washers.

0074 00-1