TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 299 of 783

TM 9-2350-260-20-1-3

TRANSMISSION OIL PRESSURE TRANSMITTER REPLACEMENT (Sheet 3 of 3)

INSTALLATION:

NOTE

Prior to installation lightly coat male threads of all components with sealing

compound (Item 20, Appendix D).

1.

Using 3/4 inch wrench, install bushing (A) to transmission socket.

2.

Using 7/8 inch wrench, install transmitter (B) to bushing (A).

3.

Push socket of rubber insulated connector (C) into transmitter cap (D).

4.

Remove rags from under transmitter.

5.

Start and run engine.

Observe o pressure indicator for normal oil pressure (TM 9-2350-260-10).

6.

Shut down engine (TM 9-2350-260-10).

7.

Install transmission shroud (page 9-23).

End of Task

TA147319

10-287