TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 289 of 783

TM 9-2350-260-20-1-3

ENGINE OIL LOW PRESSURE SWITCH REPLACEMENT (2D ENGINE)(Sheet 3 of 3)

1.

Using adjustable wrench, install elbow (A) to engine.

2.

Using 7/8 inch wrench, install adapter (B) to elbow (A).

3.

Using adjustable wrench, install new switch (C) into adapter (B).

4.

Lubricate connector (D) with silicone compound (Item 32, Appendix D).

5.

Push socket of rubber insulated connector (D) into switch cap (E).

6.

Remove rags from under engine oil low pressure switch.

7.

Install engine oil high temperature switch (page 102-74).

8.

Connect engine for powerplant ground hop (page 5-54).

9.

Start and run engine.

Observe oil low pressure indicator for normal oil pressure.

(TM 9-2350-260-10).

10. Shut down engine.

Disconnect engine from powerplant ground hop (page 5-67).

11. Install powerplant (page 5-40).

End of Task

TA147309

10-277

'