TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 288 of 783

TM 9-2350-260-20-1-3

ENGINE OIL LOW PRESSURE SWITCH REPLACEMENT (2D ENGINE)(Sheet 2 of 3)

REMOVAL:

1.

Place rags (Item 65, Appendix D) under engine oil low pressure switch.

2.

Pull socket of rubber insulated connector (A) from switch cap (B).

3.

Using 7/8 inch wrench to hold adapter (C), use adjustable wrench and remove switch (D) from adapter (C).

4.

Using 7/8 inch wrench, remove adapter (C) from elbow (E).

5.

Using crescent wrench, remove elbow (E) from engine.

INSTALLATION:

NOTE

Prior to installation, lightly coat male threads of all components with sealing

compound (Item 20, Appendix D).

Go on to Sheet 3

TA147308

10-276