TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 284 of 783

TM 9-2350-260-20-1-3

ENGINE OIL TEMPERATURE TRANSMITTER REPLACEMENT (2D ENGINE)(Sheet 3 of 3)

5.

Remove rags from under transmitter.

6.

Using 1/2 inch wrench, install new self-locking nut

and clamp (D).

7.

Connect engine for powerplant ground hop

(page 5-54).

8.

Start and run engine.

Observe oil temperature

indicator

for

normal

oil

temperature.

(TM 9-2350-260-10).

9.

Shut down engine.

Disconnect engine from

powerplant ground hop (page 5-67).

10. Intel powerplant (page 5-40).

2.

Using 15/16 inch wrench, install transmitter (A) into

engine.

3.

Lubricate connector (B) with silicone compound

(Item 32, Appendix D).

4.

Push socket of rubber insulated connector (B) into

transmitter cap (C).

End of Task

TA147304

10-272